Filter
Top Products
3-17
NMEAVersion2.0
Rangeandbearingmode:Rhumbline
NMEAVersion1.5
Rangeandbearingmode:Greatcircle
SELECT
SNTNC
RETURN
ON/OFF
AAM
APB
BOD
BWR
DPT
GGA
GLL
GTD
MTW
RMA
RMB
RMC
VHW
VTG
WPL
XTE
ZDA
HDT
HDG
MWV
TTM
--
ON
--
--
--
--
ON
--
--
--
ON
ON
--
ON
--
--
ON
--
--
--
--
AAM
APB
BOD
BWC
DBT
GGA
GLL
GTD
MTW
RMA
RMB
RMC
VHW
VTG
WPL
XTE
ZDA
HDT
HDG
MWV
TTM
--
ON
--
--
--
--
ON
--
--
--
ON
ON
--
ON
--
--
ON
--
--
--
--
SELECT
SNTNC
ON/OFF
RETURN
NMEA data sentences
7. Select sentence and press the ON/OFF soft key to show ON (output) or “- -“ (no output)
as appropriate.
8. Press the RETURN soft key.
9. Press the [MENU] key to quit.
Contents of DATA 1 and DATA2 PORT menus
Item Description Settings Default Setting
FURUNO GPS
Sensor
Selects whether the GPS Receiver
GP-310B/320B is connected to the
DATA1 or DATA2 port or not.
Yes, No Yes (DATA1)
No (DATA2)
Output Format Selects NMEA output version for the
equipment connected.
NMEA0183 Ver.
1.5, NMEA0183
Ver. 2.0
NMEA0183 Ver. 2.0
Lat/Lon Format Selects latitude/longitude format to
output.
DD°MM.MM’,
DD°MM.MMM,
DD°MM.MMMM’
DD°MM.MMM’
Output Destination Selects whether to output route (data
sentence RTE) and waypoint data (data
sentence WPL) when destination is set.
Yes, No No
SELECT SNTNC
(soft key)
Selects data sentence(s) to output. Select sentence with the trackball and press the
ON/OFF soft key to show ON or “- -“ (OFF) as appropriate. See the figure above for
sentence and default settings.