Filter
Top Products
2. WIRING
2-19
Outline
A coaxial plug is made up of the following parts:
(B) (A)
(2)
(1)
(3)
(7)
(8)
(5) (6)
(4)
Note 1: When sawing or filing the cable, keep it horizontal to keep shavings out of the cable.
To remove shavings which may have fallen into the cable, hold the cable end
downward and tap the cable lightly.
Note 2: A minimum cable bend radius of 150 mm must be observed at the cable run. If it is
necessary to bend the cable twice or more in a tight area, the bending radius should
be more than 250 mm.
How to fit the coaxial plug
1. Cut the cable with a hacksaw for the length desired, taking into account that the length
of the outer body of the coaxial plug is 77 mm.
39
Cut here.
Sheath
2. Remove any shavings from the cable. Using the tubing cutter, cut the vinyl jacket, the
outer conductor and the insulator to expose the inner conductor by 40 mm. Be careful
not to damage the inner conductor.
40
Cut here.
Outer conductor