Filter
Top Products
2. WIRING
2-22
13. If the coaxial cable connector is installed outdoors, follow the steps in below.
a) Tape the junction with self-bonding tape.
b) Wind vulcanizing tape around the self-bonding tape.
c) Finally, wrap vinyl tape over the vulcanizing tape.
Vinyl tape
Vulcanizing tape
Self-bonding tape
Vinyl sheath
Assembled connector
Connecting the coaxial cable
Connect the coaxial cable to the transceiver unit as below.
1. Loosen eight bolts (M6x20) to remove the dust cover from the output WG adapter.
2. Fasten eight bolts (removed at step 1) to attach the flange to the transceiver unit.
3. Attach the coaxial cable to the converter of the flange.
Circulator
Adapter
Output WG adapter
M6x20 (8 pcs.)
Coaxial cable
Converter
M6x20 (8 pcs.)
Transceiver unit, internal view
Flange