Filter
Top Products
1. MOUNTING
1-15
8. Coat the inside of the tank guide with ADHESIVE 1104 200G. Then, fasten
tank guide at the neck of the main shaft securely with M10X80 bolts.
Bow mark
Bow
Hex. bolt
(M10X80)
Nut
Spring washer
Flat washer
Face the tank guide
toward ship's bow.
: Coat with ADHESIVE 1104 200G
*
Tank guide attachment
9. Pass the main shaft through the flange assembly.
10. Pass the main shaft through the shaft retainer at the raise/lower drive unit.
Pipe cap
Shaft retainer
Main body flange
Bow mark
Spring washer
Hex. bolt M10X35
U-nut
Bow