Filter
Top Products
3. ADJUSTMENT
3-7
OFF ON
OFF (OFF, 5-15 kt)
AUTO RETRACTION :
SPEED ALARM/MESSAGE
:
DEFAULT SETTING :
NO YES
: SELECT
: CHANGE MENU: END
MENU :
1 2
** SYSTEM SETTING 2 **
MAXIMUM ALLOWABLE SPEED IS 15 KNOTS WHILE SOUNDOME IS BEING
RETRACTED. IF VESSEL HAS REPAID ACCELERATION CAPABILITIES,
AUTO RETRACTION SETTINGS OF 10-12 KNOTS ARE MANDATORY TO
AVOID CATASTROPHIC DAMAGE TO SOUNDOME ASSY. ANY PHISICAL
DAMAGE TO THE SOUDOME ASSY. IS CONSIDERED ABUSE AND
IS NOT A WARRANTY ISSUE.
SWEEP INDICATOR
:
DOT LINE
OFF MOTION SENSOR SAT. COMPASS
STABILIZER
:
OFF ONGAIN SETTING PROTECT:
OFF ONHORZ/HISTORY :
OFF ONHORZ/VERT ZOOM :
OFF ONHORZ/PLOTTER :
OFF NORMAL REDEMPHASIS MODE :
System setting 2 menu
8. Press ▼ to select STABILIZER.
9. Press ► to select SAT. COMPASS.
10. Press the MENU key twice to close the menu.
Note: To output data from SC-50/110 in NMEA format, set the SC-50/110 as
follows.
-Output format: IEC ed1
-Sentence: ATT (For others, set all OFF.)
-Baud rate: 38400 bps
-Cycle: 25 ms
(Talker : any)
Note: When connecting the analog signal of Satellite Compass SC-50/110 to the
MOTION SENSOR port on the transceiver unit, choose MOTION
SENSOR at step 9 in the above procedure. For wiring details, see the
interconnection diagram at the back of this manual.