Filter
Top Products
1-3
Assembling and mounting of hull unit
The hull unit is shipped disassembled as the parts shown in the hull unit kit on
pages 1-10 and 1-11. Assemble the hull unit as shown in the procedure below.
Necessary tools
emaNnoitacificepSskrameR
hcnerW)mm71ezis.xeH(01MroF
hcnerW)mm02ezis.xeH(02MroF
hcnerWepiPmm55
hcnerWllaBmm4ezisxeHtiktinulluhhtiwdeilppuS
1. Unscrew 10 pieces of socket head cap screws with the ball wrench (supplied)
to detach the soundome.
Rotate 3 or 4 turns
by hand to make
sure that turning
mechanisms are
functioning properly.
Apply Kinoruster.
Socket head cap screw
(10 pcs, M5 x 30)
Spring washer
Protective sponge
Remove
SOUNDOME
O-ring
Kinoruster: Anti-crevice
corrosion sealant (supplied)
Figure 1-3 Detaching the soundome