Filter
Top Products
7
Menu Screen
The CSH-5 MARK-2 employs four menu screens; menu-l, menu-2
and system menu. Of the four menus, the menu-2 and system menu
contain preset items which do not require setting alteration if they are
once set at installation. See page 32 for further details. The menu-l
contains items to be set by the operator while using the sonar, taking
the fishing ground and fishing method into account. This menu can
be recalled on the lower part of the screen as “scan menu” during
normal operation. This let you adjust setting while observing the so-
nar picture.
noitacilppAesuotwoH
1-UNEM
metsysroF
gnittes
hcaetceles,noitallatsniretfA
metsysruoyotgnidroccameti
smetitceleS.noitarugifnoc
rorecudsnartehtgnisiarretfa
.rettimsnartehtffogninrut
2-UNEM
METSYS
UNEM
UNEMNACSgnittesresuroF
ybneercsunemehtllaceR
ehttsujdadnayekUNEM
ranosytilauqtsebehtrofmeti
.erutcip
Recalling Scan Menu
Press the MENU key, and 5 lines of the menu items are displayed on
the lower part of the screen. Note that the scan menu can be recalled
only when the transmitter is on.
**
SCAN MENU
**
( RANGE SW : U/D GAIN SW : L/R )
HUE : 1 234
TX OUTPUT :8
PULSELENGTH : 7
TX CYCLE : 10
TVG NEAR : 6
Changing Setting
To change a setting, select item with the RANGE control and setting
with the GAIN control. The selected item is highlighted in green and
the selected setting is circumscribed in white. To scroll the menu items,
turn the RANGE control counterclockwise.
Note:
The gain and range of the sonar picture can not be changed
while the scan menu is displayed.