Filter
Top Products
54
13. UNIT DIAGNOSTIC TESTS
This unit has eight built-in diagnostic tests which check it for proper
performance. Although the tests are designed primarily for use by the
service technician, they can also be executed by the user to identify
defective components. However, never attempt to check inside the
unit; there are no user-serviceable parts inside. Any repair work is
best left to a qualified technician.
Turning-on/off Diagnostic Test
1. Press the MENU key, and then select the system menu by operat-
ing the GAIN control.
2. Select the “SELF-TEST’ function by operating the RANGE switch.
Select an appropriate self-test by operating the GAIN control.
SUB
LANGUAGE ENGLISH JAPANESE ESPANOL DAN SK
SELF TEST SINGLE PANEL COLOR GRAY
CONTI SIO ECHO-1 ECHO-2
~
3. Press the TX switch to execute the self-test.
4. To exit from the self-test screen, press the MENU key for a few
seconds. When the “SINGLE” is selected, the unit automatically
restores the system menu after the test is completed.
Description of Unit-diagnostic Tests
Single Test
This test checks the Main Board and Transceiver Unit for proper op-
eration one time, after which normal operation is restored. After the
test is completed, the results are indicated as OK (normal operation)
or NG (malfunction), to the right of the device checked.
SINGLE TEST
MAIN 105-0541-XXX 105-0542-XXX
ROM = OK
RAM = OK
P. W = O K
TRX 105-∗∗∗∗-XXX 105-∗∗∗∗-XXX
ROM = OK
RAM = OK
I/F 105-0267-XXX
ROM = OK
RAM = OK
Display Unit Program No. is displayed
and ROM, RAM and P.W (Password)
are checked for proper operation.
TRX (Transceiver) Unit Program No.
is displayed, and ROM and RAM are
checked for proper operation.
ROM and RAM of the interface
module CSH-5060 (option) are
checked for proper operation. If the
interface module is not provided,
program number and check result are
not displayed.
XXX : Version number
∗∗∗∗: 0635 e 107kHz
0644 e 85kHz