Filter
Top Products
2 - 7
Figure 2-13 How to lead in cables
through the pedestal
Cable
clamp
Leaving sheath
intact, pass cable
through cable
clamp
Process cable same as
on tabletop type
Leading in cables to the display unit
To lead in cables easily, unfasten the cable clamp at the right side of the display unit.
Figure 2-12 Location of cable clamp inside the display unit
Tabletop
Cables can be led in through the cable gland at the rear or underside of the unit.
Pedestal
Lead in cables through the cable gland
at the bottom right-hand side of the ped-
estal. Pass cables through the cable
clamp and tighten the cable clamp. Fix
cables to the pedestal frame with cable
ties as shown in Figure 2-13. Finally,
pass cables through the cable clamp at
the right side of the display unit and then
tighten the cable clamp.