Filter
Top Products
4. POINTS, EVENT MARKS
4-10
4.10 How to Move a Point to the Screen Center
You can easily place a point at the center of the plotter display from the points list.
1. Open the home screen, then tap [Lists].
2. Tap [Points] to open the points list.
3. Tap [Name], [Icon], [Color] or [Range] at the top of the list to sort the list.
4. Tap the point to find then tap [Find On Chart].
The menu closes and the selected point is put at the center of the screen on the plotter
display. If a different mode was in use at the time of point selection
4.11 How to Show or Hide All Points or Points Names
Points
Open the [Layers] menu, then turn [Points] on or off.
Points names
Open the home screen, then tap [Settings] - [Points]. Turn [Display Points Names] on
or off.
4.12 How to Go to a Point
Tap the point (including MOB mark) to go to among the three methods shown below.
• Select the point on the screen
• Select a position on the screen
• Select the point from the points list
After you have selected a point, you can do the following.
• Restart the cross-track error (XTE) indication.
• Stop and restart Goto. (Tap the boat icon to display the pop-up menu. Tap [Stop
Nav] and [Restart Nav] respectively.)
Note: Before you try to go to a point, make sure that the path to the point is clear. Make
sure to zoom your chart to check for hazards which appear on a smaller scale.