Filter
Top Products
12
GENERAL OPERATION
INITIAL SETUP
Important: The Tuner Region must be selected for correct operation. Default - USA.
See section: Tuner Region Selection
ADJUSTING THE VOLUME
Turn the ‘Rotary Encoder’ to adjust the volume.
ZONE VOLUME
Press the ‘Rotary Encoder’ to step through zones.
All zones Zone 1 Zone 2
SETTINGS
Press the ’Menu’ button and select ‘Settings’. Select the desired setting to adjust.
Note: Whilst in Settings the ‘Menu’ button acts as a back/return to the previous screen.
Any key press exits the menu screen.
TONE — Adjust the Bass/Middle/Treble settings. Press the ‘Rotary Encoder’ to
cycle between Bass/Middle/Treble
ZONE SETUP — The MS-RA205 Marine Stereo features Multi-Zone technology
which enables 2 ‘Zones’ with independent volume/balance control.
Select the Zone you wish to setup.
Select ‘Balance’ to adjust the audio balance from left to right within the selected zone.
Select ‘Volume Limit’ to set the maximum volume limit within the selected zone.
Select ‘Zone Name’ to give the zone a name of your choice. Rotate the rotary
encoder to change the character. Press the rotary encoder to select. Press the
‘Previous’ button to delete characters
- To save changes press the ‘Play’ key
- To exit without saving any changes: press the ‘Menu’ key.
SUBWOOFER — Select ‘Settings’ then ‘Zones’ then ‘Subwoofer’.
Select ‘Sub level’ to set the desired maximum subwoofer output volume.
Select ‘Sub Filter’ to select the desired cut-off frequency.
55Hz - 85Hz - 120Hz - 160Hz
Default: 85Hz
Note: From any source screen press and Hold the `Rotary Encoder’ for quick access to
subwoofer level adjustment