Filter
Top Products
21
Tuner Region - Australasia-Europe-Japan
In these Tuner regions once the MS-BT200 is installed and connected the source
will be available.
Please refer the MS-BT200 Installation Instructions for the following:
· Installing the MS-BT200 Bluetooth Module
· Bluetooth Pairing
· Choosing a Device from the paired list
BROWSING MUSIC COLLECTIONS OVER BLUETOOTH
NOT SUPPORTED
Browsing music collections from the MS-RA205 is not supported over Bluetooth.
Initial song and Playlist selection must be done on the media device. However the
FUSION Stereo does provide basic playback control with the Play / Pause, Next and
Previous keys. Forward and Rewind functions are not supported.
BLUETOOTH DEVICE CONTROL
PLAY/PAUSE Play or Pause the track
BACK/PREVIOUS Short Press: Press once to jump back to start
of current track.
Press twice to select previous track.
NEXT/FORWARD Short Press: Selects next track
Note: The availability of song information such as song title, artist name, track duration and album
cover artwork is dependent on the capability of your phone and music application. Album cover
artwork and Shuffle/Repeat Status icons are not supported over Bluetooth.
BLUETOOTH SETTINGS
To change a setting in the Bluetooth settings menu:
1. Press the Menu key while the BT Source screen is displayed.
2. Turn and then press the Rotary Encoder to select one of the following;
• List of Paired Bluetooth media devices.
To connect to an active device on the Paired Devices list rotate the rotary encoder to
select the device. Press the rotary encoder to select the check box.
The device must be turned on, with Bluetooth on and not connected to another
Bluetooth device, otherwise it will not connect.
DISCOVERABLE OFF/ON
Enable this option to make the BT-200 Bluetooth module discoverable to Bluetooth
media devices. Press the encoder to select/deselect the check box.
Note: To prevent interruption to audio streaming over Bluetooth it is recommended that the
Discoverable feature is turned off after pairing your device to the MS-RA205.
REMOVE DEVICES
Select this option to display the current list of paired devices. Select the device to be
removed by rotating and pressing the rotary encoder.