Filter
Top Products
26
TROUBLESHOOTING
RESET
Should the stereo become unresponsive. Follow the below steps:
1. Press and hold the ‘Power’ button for 10 seconds to reset the stereo.
2. Reset your iPod/iPhone/MTP device
3. Remove all power for 1 minute and then reconnect.
FACTORY RESET
The factory reset function will return all settings in the MS-RA205 to the factory default value.
Warning: All AM, FM and VHF station presents are erased. Tuner and VHF tuner
regions are reset to USA. All zones are enabled and zone settings, tone, subwoofer
filter settings, source settings and device name are returned to default values.
To reset your MS-RA205 to factory default values:
1. Press the Menu Key.
2. Select Settings > Update. Select Factory reset. All settings will be restored
to the factory default. At the completion of the reset process the stereo will
automatically power down and restart.
iPod
Why does my FUSION Head unit keep locking up when connected to my iPod/iPhone?
If you are experiencing software lock-ups or your unit freezes:
• Reset your iPod/iPhone (see Apple website from model-specific information).
This should resume normal operation.
• Make sure you have the latest version of iTunes and the latest operating
software in your iPod/iPhone. It is important to update software when Apple
releases new versions. If you are connected via a dock, ensure you are using
the correct sleeve and the connection to the Head unit is secure.
Note: After any IOS update to your Apple iPhone we recommend resetting the iPhone to ensure
correct operation. Press and hold the Sleep/Wake button and the Home button together for at least
ten seconds, until the Apple logo appears.
Will my iPod/iPhone connect to my FUSION product if the battery is flat?
No. It will take a number of minutes for the Apple product to get a minimum level of
charge before it can connect and become operational. Please connect and wait for the
unit to initialise.
My iPod/iPhone will not connect to the head unit while in a FUSION dock accessory.
If your Head unit displays “Not Connected” while using iPod as input source:
• Check that you are using the correct sleeve combination. If you have the
incorrect sleeve combination this could prevent the iPod connector from
mating correctly. It could also damage the connector in the dock or your
iPod/iPhone itself.
If you are uncertain which iPod model you have, go to http://www.apple.com/support/
to get the correct model information for your iPod.
If you are still unable to connect once you know for certain you have the correct iPod/
iPhone–sleeve combination: