Filter
Top Products
Restricted A166-0CG-1.00-2
Full
ix
About this Guide
This guide describes how to configure the Serial Status (Serial Status Protocol) Data Collection
Application (DCA).
Purpose of this Guide
This document describes the purpose and use of each of the configuration parameters of the
Serial Status DCA. This document makes no attempt to explain how the configuration process
operates, it is limited to describing the format and content of the DCA configuration only.
Who Should Use this Guide
This document is intended for use by individuals responsible for the configuration of the Serial
Status DCA in GE Energy Services RTUs. These people should be familiar with the operation
and maintenance of RTUs in general, but may not be familiar with the GE Energy Services
family of products.
Before reading this document, you should have a basic understanding of the GE Energy Services
hardware environment, the configuration system, and the Serial Status DCA.
Additional Documentation
The following supporting texts are available:
• Serial Status DCA Functional Specification (A166-0FS.WES)
• WESMAINT II Maintenance Facility Configuration Guide (B014-0CG.700)
• WESMAINT II+ Configuration Guide (B014-1CG.CCU)
• WIN User's Configuration Guide for the WESDAC D20 (B008-0CG.D20)
• WIN User's Configuration Guide for the CCU (B008-1CG.CCU)
• Config Pro Configuration System User’s Guide (P012-0UG