Filter
Top Products
12
Once the mast is secure
remove the bolt from the base
of the mast and stow it in a
secure place. You will need
the bolt later for safe lowering
of the mast.
Place the mast foot on the mast base
and place the pin in it. This prevents the
mast from leaving its base when lifted.
Check that the wires are not tangled.
1
Stepping the mast
Then, with one person on the trampoline, the second person lifts the
mast by the top and moves down the mast until the person on the
trampoline can take the mast on their shoulder. Then this person
pushes his feet against the rear crossbar and pushes the mast for-
ward with the weight of his body.
Once the mast is secured, remove the pin from the base of the
2
The second person can now take
the forestay, make sure it is not
tangled and pin it into one of the
top holes of the furler mounted
stay adjuster.
3
4
Now you can affix the cunnin-
gham blocks to the brackets on
each side of the mast.
5
NB : For the 1st time you raise the
mast, it is recommended
you use 3 people for extra safety.
CAUTION - DANGER - ALUMINIUM MAST
STAY AWAY OF
ELECTRICAL WIRES