Filter
Top Products
21
Attach the Spi halyard block
Shackle the spi halyard block through the small bow
shackle attached to the thin cord at the top of your FX-
One mast. Now pass the halyard through the pulley
and thread as per the photograph.
Classical Spinnaker kit
1
Fit the two ratchet blocks and stand-up springs to the
eye straps on the inboard side of the daggerboards.
2
Attach the spinnaker pole to the tang at the middle of the
front crossbar.
3
Attach the spinnaker pole bridles and the mid pole support wires to
the small hole in the front of the bow tang.
4
Jib furler bridle
Mid pole support wire
Spi pole bridle