Filter
Top Products
14
Boom
Tie one end of the rotation line to the front of the clamcleat on top of the boom. Pass the other end of the line
through the end of the rotation arm on the mast. Take the line back through the clamcleat and fit a plastic ball
stopper at the end.
4
Slide the outboard end of the boom through
the webbing loop attached to the clew of the
mainsail.
1
Connect the boom to the
mast using the hinge ver-
tex, clevis pin and split
ring.
2
Connect the shackle on the boom outhaul
line to the grommet in the clew of the
mainsail.
3