Filter
Top Products
20
Before Sailing
Install the drain plugs – do not overtighten, hand tight is sufficient.
Overtightening may cause the drain plug flange to distort and cause
leakage.
Tension the rig. This can be accomplished by having your assistant
hang from the trapeze or you can use mainsheet tension on one
side at a time so that you can adjust the shroud position in the side
stay adjusters.
Fit the daggerboards into the daggerboards wells. The dag-
gerboard roller shock cord should be tight enough to prevent
the daggerboard from slipping down.
1
2
3
Always wear your Hobie buoyancy vest, look out
for overhead power lines and
HAVE LOTS OF FUN!
It is recommended that beach rollers be used
to move your Hobie. This will save your back
and the bottom of the boat.
Always wash traveller with fresh water after
use in salty water.
4
5