Filter
Top Products
Start-Up Options Menu
Press the MENU key when the Title screen is displayed to access the Start-Up Options
menu.
Use the UP or DOWN 4-WAY Cursor Control keys to
position the cursor, then the RIGHT Cursor key to select
one of the following choices. If you wait too long, the
system will default to whichever menu mode happens
to be highlighted:
• Normal
• Simulator
• System Status
• PC Connect (use with PC Connect Cable).
See the following paragraphs for more information about each of these choices.
Normal Operation
Use Normal operation for on-the-water operation with a transducer connected. In
addition, your Matrix™ Fishing System uses advanced transducer detection methods to
determine if a transducer is connected. If a functioning transducer is connected, Normal
operation will be selected automatically at power up and your Matrix™ Fishing System
can be used on the water.
Exit Normal operation by powering your Matrix™ Fishing System off.
Start-Up Options Menu
22
21
User Mode (Normal or Advanced) - An Advanced Mode is provided for users who desire the
highest level of control over the Fishing System and Normal Mode for users who desire
greater simplicity and fewer menu choices. While you are in Advanced Mode, additional
Advanced menu choices will be displayed throughout the menu system when you navigate
to specific menus. Any changes made while in Advanced Mode will remain in effect after you
switch back to Normal Mode. See Setup Menu Tab: User Mode for specific instructions on
changing to Advanced User Mode.
Total Screen Update® - when you change any menu settings that affect the Sonar View, the
view will update immediately (i.e. you don’t have to exit the menu to applythe change to
the screen). For instance, by switching between "Inverse" and "Structure ID®" from the
X-Press™ Menu it is possible to alternate quickly between the two viewing methods.
Sonar Tab, Normal Mode
Sonar Tab, Advanced Mode
M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:35 PM Page 26