Filter
Top Products
52
Views Menu Tab
From any view, press the MENU key twice to access the
tabbed Main Menu System, then press the RIGHT 4-
WAY Cursor Control key until the Views tab is selected.
This menu tab allows you to set the available views to
either hidden or visible in the view rotation. The view
will be removed from the view rotation if it is set to
Hidden and will be displayed in the view rotation if it is
set to Visible. The following views are available:
• 2D Sonar View
• 2D Zoom View
• 2D Big Digits View
• 3D Sonar View
• 3D/2D Sonar Combo View
• 6-Beam Sonar View
• Self Test
• Accessory Test.
T
o Change the View Status of Any View:
1. Highlight the View main menu tab.
2. Use the UP or DOWN 4-WAY Cursor Control keys to select a View.
3. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the status of the view
from Hidden to Visible.
Views Menu
51
NMEA Output
(Advanced)
NMEA Output turns the NMEA output on or off. This menu choice is available only when in
Advanced User Mode (see Setup Menu Tab: User Mode.)
The following NMEA sentences are output:
DPT . . . . . . . . . . Depth
MTW . . . . . . . . Water Temperature
GLL . . . . . . . . . . Lat/Lon Position
GGA . . . . . . . . . GPS Fix Data
RMC . . . . . . . . . Recommended Minimum Specific GNSS Data
VTG . . . . . . . . . Course Over Ground and Ground Speed
ZDA . . . . . . . . . Time and Date
When navigating, the following NMEA sentences are also output:
APB . . . . . . . . . . Autopilot Sentence B
BWR . . . . . . . . . Bearing and Distance to Waypoint
RMB . . . . . . . . . Recommended Minimum Navigation Info
T
o turn NMEA Output on or off:
1. Make sure you are in Advanced User Mode, then highlight NMEA Output on the
Setup main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the NMEA Output to On
or Off (On, Off, Default = Off).
M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 56