Filter
Top Products
Self Test displays results from the internal diagnostic self
test, including unit serial number, Printed Circuit Board
(PCB) serial number, software revision, total hours of
operation and the input voltage.
Accessory Test lists the accessories connected to the system.
NOTE: The speed accessory will be detected only if the
paddlewheel has moved since your Matrix Fishing System was
powered up.
NOTE: GPS will be shown as Connected when your Matrix
Fishing System detects your GR4 GPS Receiver.
PC Connect
(With PC Connect Cable Only)
Use PC Connect to update the software of the Matrix Fishing System control head. This feature
requires the use of the PC Connect Cable. Complete instructions are included with the PC Connect
Cable accessory.
NOTE: The PC Connect Cable requires a separate purchase. For more information visit our website at
www.humminbird.com or contact our Customer Resource Center at 1-334-687-0503.
Exit PC Connect mode by powering the Matrix Fishing System off.
Accessory Test Screen
System Status Self Test Screen
19
Simulator
Use the Simulator to learn how to use your Matrix Fishing
System before taking your boat on the water. The Simulator
is a very powerful tool that simulates on the water
operation, providing a randomly-updated display. We
recommend going through this manual while using the
Simulator, since all of the menus function and affect the
display the way they actually do when in Normal operation.
NOTE: To get the full benefit of the Simulator, it is important to select Simulator manually from the Start-
Up Options menu as opposed to letting the Matrix Fishing System enter Simulator automatically (as it will
if a transducer is not connected and you do nothing during power up). Manually selecting Simulator from
the Start-Up Options menu allows you to pre-configure your Matrix Fishing System for on the water
operation. Any menu changes you make will be saved for later use.
A message will appear on the display periodically to remind you that you are using the Simulator.
Exit the Simulator by powering your Matrix Fishing System off.
System Status
Use System Status to view system connections and to conduct a unit self-test. Exit System Status by
powering your Matrix Fishing System off.
The following screens are displayed in turn when you press the VIEW button when using System Status:
• Self Test
• Accessory Test
Simulator, Shown with Optional
WeatherSense
TM
Accessory
18