Filter
Top Products
Setup Menu Tab
From any view, press the MENU key twice to access the tabbed Main
Menu System, then press the RIGHT cursor key until the Setup tab is
selected.
NOTE: Menu choices will vary depending on system settings such as
whether the unit is set for Advanced User mode and what accessories
are attached to the unit.
The following menu choices will be added to your Setup Menu Tab
when a Handheld GPS is connected to the Matrix Fishing System:
• Units - Distance
• Units - Speed
• Triplog Reset
• Local Time Zone (Advanced)
• Daylight Savings Time (Advanced)
• Position Format (Advanced)
• Time Format (Advanced, International Only)
• Date Format (Advanced, International Only)
• NMEA Format.
See your Matrix Fishing System Operations Manual for information
on the standard Setup Menu choices
Setup Menu Tab
31
To change the Off Course Alarm setting:
1. Highlight Off Course Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys
to change the Off Course Alarm setting. (Off, 30 to 3000
feet, 10 to 1000 meters [International Models Only],
Default = 300 ft, 100 m)
Arrival Alarm
Arrival Alarm sounds when the boat has either exceeded the
distance to the destination waypoint, or has entered the Arrival Alarm Circle, based on the menu
setting when navigating. Arrival Alarm allows you to set how close the boat must be to the
destination waypoint before the Arrival Alarm will sound.
To change the Arrival Alarm setting:
1. Highlight Arrival Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Arrival Alarm setting. (Off,
30 to 3000 feet, 10 to 1000 meters [International Models Only], Default = 150 ft, 50 m)
Drift Alarm
Drift Alarm sounds when the boat has exceeded the distance from
the boat’s anchored position, based on the menu setting. Drift Alarm allows you to set the size of a
perimeter around the boat’s anchored position; if the anchored boat drifts outside of that perimeter,
the Drift Alarm will sound.
To change the Drift Alarm setting:
1. Highlight Drift Alarm on the Alarms main menu.
2. Use the LEFT or RIGHT 4-WAY Cursor Control keys to
change the Drift Alarm setting. (Off, 30 to 3000 feet, 10 to
1000 meters [International Models Only], Default = Off)
Drift Alarm Perimeter
Drift Alarm Circle
Arrival Alarm Circle
Off Course Limits
30