Filter
Top Products
large fish symbols (see Interpreting the On-Screen Information). Pressing the DOWN ARROW
again highlights "large and medium fish" and pressing a third time highlights "large, medium, and
small fish".With this setting, any fish symbol appearing on screen activates the Fish Alarm. Once
the Fish Alarm is enabled, the Wide 3D Paramount emits an audible beep when the selected size
fish symbol appears on-screen. The sound is slightly different for each of the three fish symbol
sizes, so with practice, it is possible to distinguish the size of the detected fish without looking at
the unit. Fish alarm cannot work when the Fish ID function is disabled.
To disable the Fish Alarm, press MENU until the Fish Alarm menu appears onscreen. Use the UP
ARROW to highlight "Off", and let the menu time out.
Fish Alarm settings are remembered when the unit is powered off.
Triplog
Triplog provides a running log of information based on input from the
Temp/Speed sensor and an internal clock. Since Triplog require
information from the Temp/Speed sensor to operate, if this sensor is not
detected by the Wide 3D Paramount, the Triplog menu will not appear as
an option.
To enable Triplog, press MENU repeatedly until the Triplog menu is on-
screen. The Factory Setting is "Hide" which is selected. Use the DOWN ARROW to select
"Show" and the Triplog box will appear at the upper left corner of the screen.
Triplog provides four pieces of information: the
distance traveled since the Wide 3D Paramount
was poweredup (or reset), the average speed, the
total time elapsed since power-up (or reset), and
the input voltage from your boat's electrical system.
The time, speed, and distance calculations are
useful for tracking your progress on a trip. The input
voltage is useful for determining the condition of the
charging system of the boat. When used in a
portable application or whenever the Wide 3D