Filter
Top Products
Paramount is operated from a battery source, the voltage number can be used to determine
battery life. The Wide 3D Paramount will operate at voltages from 10 to 16 VDC. Voltages in
excess of 16 or less than 10 VDC will cause the unit to power off.
Once Triplog is enabled, pressing MENU to bring the Triplog menu on-screen now shows an
additional option, "Reset". By selecting Reset, the timer and distance log resets to 0 and the
Triplog will begin to calculate elapsed time, distance traveled, and average speed from the time of
reset.
Triplog can be used with any view, except Wide Side.
To disable Triplog, press the MENU button until the Triplog menu is on-
screen. Use the UP ARROW to select Hide and let the menu time out.
The Triplog continues to operate and log time and distance even when it
is not visible on-screen. The Triplog resets at power off.
Perspective
The Wide 3D Paramount utilizes a highly sophisticated system of
displaying terrain from several different viewpoints. The Perspective
menu is available in 3D View or Combo view only. Six different
perspective viewpoints are available allowing "hidden" targets to be
easily located.
Press MENU until the Perspective menu is on-screen. Use the UP
and DOWN ARROWS to select the perspective option you desire.
The options are numbered 1 through 6. When perspective is set at 1,
the information is viewed from a point above, forward, and to the right
of the boat. This is the default view. As you increase the setting, the viewpoint of the user moves
incrementally to the forward, left side of the boat. The highest setting (6) gives a reverse
perspective of the default view (1). This gives a full spectrum of viewpoints and allows the user to
see all aspects of the terrain and pinpoint any target.
The following figure shows a typical view when the perspective is set
at 5. The boat icon represents the location of the user's boat relative
to the on-screen information.
The perspective menu is remembered when the unit is powered off.