Filter
Top Products
ID+ On adds an additional piece of information to the location of the fish. The depth beneath the
surface for selected fish symbols is attached to the fish symbol. In the 2D view, ID++ adds the
distance measurement from the boat to selected fish symbols. This measurement requires the
speed input to be connected in order to determine the distance the boat has travelled.
The unit remembers Fish ID setting when powered off.
Numeral Size
Numeral Size is the next Option menu. Two options are available:
"Big" and "Small". The factory setting is Big. With this setting, the
digital depth and speed and temp numerals are drawn large
enough to be readable from across the boat. The big numerals
occupy space on the display which could be used for the graphics
area. Hence, the small numerals option. With small numerals
selected, a greater amount of the display area is available for the
graphic view.
Use the UP and DOWN ARROW buttons to highlight the desired selection, then press MENU to
advance to the next menu.
Numeral Size settings are remembered when the unit is powered off.
Transducer
The Transducer option allows manual selection or identification of a
non-standard transducer. The Wide 3D Paramount is designed to
work with the Six-Beam transducer supplied with the unit. It can also
work simultaneously with a single beam deep transducer. However,
there are instances in which an alternative transducer may be used
(i.e. a Wide Side or a trolling motor mount transducer). Often two
transducers are used in conjunction with a transducer switch to
provide increased utility.
The 3D setting is the factory setting and corresponds to the standard transducer. The "Extended"
setting allows simultaneous use of the standard transducer and a secondary single beam
transducer. This application is useful for users that frequently fish in waters deeper than 240'. The
final setting is "Side", toggle to this option if you are using a wide side transducer. See the "Using
Alternative Transducers" section for more details on secondary and alternative transducers.
The Wide 3D Paramount does not have the ability to positively identify a transducer other than
the Standard Six-beam. In the event that a non-standard transducer is connected, the user must