Filter
Top Products
10
2
PANEL DESCRIPTION
■ LCD display
q TX INDICATOR
Indicates the frequency readout for transmit.
w VFO/MEMORY CHANNEL INDICATOR
(pgs. 22, 51)
Indicates the VFO mode or selected memory chan-
nel number.
e SELECT MEMORY CHANNEL INDICATOR (p. 60)
Indicates the displayed memory channel is set as a
select memory channel.
r MULTI-FUNCTION SWITCH GUIDE
Indicates the function of the multi-function switches.
t LCD FUNCTION SWITCH GUIDE
Indicates the function of the LCD function switches
([F-1]–[F-5]).
y MULTI-FUNCTION SCREEN (p. 11)
Shows the screens for the multi-function digital
meter, spectrum scope, voice recorder, memory
channel, scan, memory keyer, RTTY decoder, IF fil-
ter selection or set modes, etc.
u MEMORY CHANNEL READOUTS (p. 51)
➥Show the selected memory channel contents in
VFO mode.
➥Show the VFO contents in memory mode.
i FREQUENCY READOUTS (p. 23)
Show the operating frequency.
•Outline characters are used for non-accessing readout.
o CLOCK READOUT (p. 62)
Shows the current time.
!0 RTTY TUNING INDICATOR (p. 42)
Shows the tuning level in RTTY mode.
!1 QUICK TUNING INDICATOR (p. 24)
Appears when the quick tuning step function is in
use.
!2 PASSBAND WIDTH INDICATOR (p. 25)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
!3 IF FILTER INDICATOR (p. 29)
Shows the selected IF filter number.
!4 SHIFT FREQUENCY INDICATOR (p. 25)
Shows the shift frequency of the IF filter.
!5 MODE INDICATOR (p. 25)
Shows the selected mode.
!6 BAND WIDTH INDICATOR (p. 29)
Shows the passband width of the IF filter.
ANT
1
COMP
OFF
WIDE
HOLD
SUB
MARKER
ATT
10dB
Grid
10k
10dB
SPAN
ATT
MARKER
HOLD
SET
METER
Po
P.AMP
1
AGC
MID
ATT
OFF
VOX
OFF
+12.5k+12.5k
-12.5k-12.5k
SPECTRUM SCOPESPECTRUM SCOPE
BW
2.4k
SFT
0
USBUSB
qw:pp
VFO 21.085.00
TX
CW
FIL2
qr.qqy.pp
qr.qpp.pp
56ß
USB
1ß 21.085.00 CW
VFO
FIL2
t
i
i
!6 !4!5 !2!3 !1 !0 o
y
u
u
r
q
w
e
w