Filter
Top Products
72
9
SET MODE
■ Miscellaneous (others) set mode
(continued)
MMAAIINN DDIIAALL AAuuttoo TTSS
This item sets the auto tuning step function. When ro-
tating the tuning dial rapidly, the tuning step automat-
ically changes several times as selected.
There are 2 type of auto tuning steps: HIGH (Fastest)
and LOW (Faster).
HHIIGGHH
Auto tuning step is turned ON.
Fastest tuning step during rapid rotation
(default)
LLOOWW
Auto tuning step is turned ON.
Faster tuning step during rapid rotation
OOFFFF
Auto tuning step is turned OFF.
SSSSBB//CCWW SSyynncchhrroonnoouuss TTuunniinngg
This item selects the displayed frequency shift func-
tion from ON and OFF.
When this function is activated, the receiving signal
can be kept to receive even when the operating mode
is changed between SSB and CW.
The frequency shifting value may differ according
to the CW pitch setting.
OONN
The displayed frequency
shifts when the operating
mode is changed between
SSB and CW.
OOFFFF
The displayed frequency
does not shift.
(default)
CCWW NNoorrmmaall SSiiddee
Selects the carrier point of CW mode from LSB and
USB.
LLSSBB
The carrier point is set to
LSB side.
(default)
UUSSBB
The carrier point is set to
USB side.
MMIICC UUpp//DDoowwnn SSppeeeedd
This item sets the rate at which frequencies are
scanned when the microphone [UP]/[DN] switches
are pushed and held. High or low can be selected.
HHIIGGHH
High speed (default,
50 tuning steps/sec.)
LLOOWW
Low speed
(25 tuning steps/sec.)
QQuuiicckk RRIITT//∂∂TTXX CClleeaarr
This item selects the RIT/∂TX frequency clearing in-
struction with the [CLEAR] switch.
OONN
Clears the RIT/∂TX fre-
quency when [CLEAR] is
pushed momentarily.
OOFFFF
Clears the RIT/∂TX fre-
quency when [CLEAR] is
pushed for 1 sec.
(default)