67
9
SET MODE
MMyy CCaallll
Your call sign, etc. can be displayed in the opening
screen when turning power ON. Up to 10 characters
can be programmed.
Capital letters, numerals, some symbols (– /
.
) and
spaces can be used.
q Push [EXIT/SET] several times to close a multi-
function screen, if necessary.
w Push [EXIT/SET] for 1 sec. then [(F-2)DISP] mo-
mentarily to select the display set mode screen.
e Push [(F-2)Z] several times to select the ‘My Call’
item.
r Push [(F-4)EDIT] to edit.
•A cursor appears and blinks.
t Input the desired character by rotating the tuning
dial or by pushing the band key for number input.
•Push [ABC] to select capital letters.
•Push [123] or [etc] to toggle numerals and symbols.
•Push [(F-1)Ω] or [(F-2)≈] for cursor movement.
•Push [(F-3)DEL] to delete the selected character.
•Push [(F-4)SPACE] to input a space.
y Push [EXIT/SET] to input the set name.
•The cursor disappears.
u Push [EXIT/SET] to exit the set mode screen.
•Opening screen example
■ Display set mode
(continued)
■ DSP filter set mode
To suit your operating style, the type of DSP filter
shape for SSB and CW can be selected.
q Push the [EXIT/SET] several times to close a
multi-function screen, if necessary.
w Push the [EXIT/SET] switch for 1 sec. to enter set
mode.
e Push the [(F-3)DSP] switch to enter the DSP filter
set mode.
r Push one of [(F2)SSB-FIL] or [(F4)CW-FIL] to se-
lect the desired DSP filter shape from sharp and
soft for SSB or CW mode, respectively.
t Push [ENTER/SET] twice to exit the DSP filter set
mode.
