Filter
Top Products
69
9
SET MODE
■ Miscellaneous (others) set mode
(continued)
QQuuiicckk DDuuaallwwaattcchh
When this item is set to ON, pushing [DUALWATCH]
for 1 sec. sets the sub readout frequency to the main
readout frequency and activates dualwatch operation.
See p. 31 for details.
OONN
Quick dualwatch ON
(default)
OOFFFF
Quick dualwatch OFF
QQuuiicckk SSPPLLIITT
When this item is set to ON, pushing [SPLIT] for 1
sec. sets the sub readout frequency to the main read-
out frequency and activates split operation.
See p. 33 for details.
OONN
Quick split ON
(default)
OOFFFF
Quick split OFF
RRFF//SSQQLL CCoonnttrrooll
The [RF/SQL] control can be set as the RF/squelch
control (default), the squelch control only (RF gain is
fixed at maximum) or ‘Auto’ (RF gain control in SSB,
CW and RTTY; squelch control in AM and FM).
See p. 3 for details.
RRFF++SSQQLL
[RF/SQL] control as RF/squelch control
(default)
SSQQLL
[RF/SQL] control as squelch control
AAUUTTOO
[RF/SQL] control as RF gain control in SSB,
CW and RTTY; squelch control in AM and
FM
FFMM SSPPLLIITT OOffffsseett((HHFF))
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for HF bands in FM
mode only and is used to input the repeater offset for
an HF band.
The offset frequency can be set from –4 MHz to
+4 MHz in 1 kHz steps.
--00..110000MMHHzz
Minus 0.1 MHz offset
(default)
--44..000000MMHHzz
Minus 4.0 MHz offset
FFMM SSPPLLIITT OOffffsseett((5500MM))
This item sets the offset (difference between transmit
and receive frequencies) for the quick split function.
However, this setting is used for 50 MHz band FM
mode only, and is used to input the repeater offset for
the 50 MHz band.
The offset frequency can be set from –4 MHz to
+4 MHz in 1 kHz steps.
--00..550000MMHHzz
Minus 0.5 MHz offset
(default)
++44..000000MMHHzz
Plus 4.0 MHz offset
SSPPLLIITT LLOOCCKK
When this item is ON, the tuning dial can be used to
adjust the transmit frequency while pushing [XFC]
even while the lock function is activated.
See p. 32 for split frequency operation details.
OONN
Split lock function ON
OOFFFF
Split lock function OFF
(default)