Filter
Top Products
66
9
SET MODE
■ Display set mode
To adjust the LCD contrast or backlight, wait until
the LCD becomes stable (10 min. or more after turn-
ing power ON). This is an inherent characteristic of
LCDs and LCD backlights and does not indicate a
transceiver malfunction.
CCoonnttrraasstt ((LLCCDD))
This item adjusts the contrast of the LCD from 0% to
100% in 1% steps.
60%
60% (default)
BBaacckklliigghhtt ((LLCCDD))
This item adjusts the brightness of the LCD from 0%
to 100% in 1% steps.
50%
50% (default)
HHoorriizzoonn
This item adjusts the horizontal position of the LCD
from 1 to 8.
4
Horizontal position is 4. (default)
BBaacckklliigghhtt((SSwwiittcchheess))
This item adjusts the brightness of the switches from
1 to 8.
8
Backlight level is 8. (Maximum; default)
DDiissppllaayy TTyyppee
This item sets the LCD screen type. There are 8 se-
lectable types: A, B, C, D, E, F, G and H.
AA
A-type LCD screen (default)
DDiissppllaayy FFoonntt
This item sets the font of the frequency readouts.
There are 7 selectable fonts: Basic1, Basic2, Pop,
7seg (7 segment numeral), Italic 1, Italic 2 and Clas-
sic.
IIttaalliicc22
Italic 2 font (default)
MMeemmoorryy NNaammee
This item sets the memory name indication ON and
OFF.
See p. 55 for details.
OONN
Memory name is displayed.
(default)
OOFFFF
Memory name is not dis-
played.