Filter
Top Products
13
4
SCAN OPERATION
4
■ Setting TAG channels
For more efficient scanning, add the desired channels as TAG
channels or clear the TAG for unwanted channels.
Channels that are not tagged will be skipped during scanning.
TAG channels can be assigned to each channel group (INT,
USA, ATIS or DSC) independently.
q While pushing and holding [H/L], push [DIAL•DUAL/GRP]
to select the desired channel group (INT, USA, ATIS or
DSC.)
w Select the desired channel to be set as a TAG channel.
e Push [SCAN•TAG] for 1 sec. to set the displayed channel
as a TAG channel.
•“
TTAAGG
” appears in the display.
r To cancel the TAG channel setting, repeat step e.
•“
TTAAGG
” disappears.
✔ Clearing (or setting) all tagged channels
While pushing and holding [H/L], push [SCAN•TAG] for 3
sec. (until a long beep changes to 2 short beeps) to clear all
TAG channels setting in the channel group.
• Repeat above procedure to set all TAG channels.
■ Starting a scan
Set scan type (Priority or Normal scan) and scan resume
timer in advance, using Set mode. (p. 55)
q While pushing and holding [H/L], push [DIAL•DUAL/GRP]
to select the desired channel group (INT, USA, ATIS or
DSC) if desired.
w Set TAG channels as described at left.
e Make sure the squelch is closed to start a scan.
r Push [SCAN•TAG] to start Priority or Normal scan.
•“
PPRRII--SSCCAANN 1166
” appears at the channel comment indicator
during Priority scan.
•“
NNOORRMMAALL SSCCAANN
” appears at the channel comment indicator
during Normal scan.
• When a signal is detected, scan pauses until the signal disap-
pears or resumes after pausing 5 sec. according to Set mode
setting. (Channel 16 is still monitored during Priority scan.)
• Rotate [CHANNEL] to check the scanning TAG channels, to
change the scanning direction or resume the scan manually.
• A beep tone sounds and “
1166
” blinks at the channel comment in-
dicator when a signal is received on Channel 16 during Priority
scan.
Push
Scan starts. When a signal is received
BUSYBUSY 25W25W INTINT
TAGTAG
NORMALNORMAL SCANSCAN
3434°34.506N34.506N
123123°23.236W23.236W
UTCUTC 1212:00:00 SAFETYSAFETY
25W25W INTINT
DUPDUP
TAGTAG
NORMALNORMAL SCANSCAN
3434°34.506N34.506N
123123°23.236W23.236W
UTCUTC 1212:00:00
25W25W INTINT
DUPDUP
TAGTAG
3434°34.506N34.506N
123123°23.236W23.236W
UTCUTC 1212:00:00 INTLINTL
[Example]: Starting a normal scan.