Filter
Top Products
32
6 DSC OPERATION
t After the all ships call has been transmitted, the following
indication is displayed.
y Push [CLR] to exit and the transceiver selects Channel 16
automatically.
• Even if [CLR] hasn’t been pushed, the transceiver automatically
selects Channel 16 after 2 sec. of inactivity.
DD
Transmitting a position request call
Transmit a position request call when you want to know a
specific ship’s current position, etc.
q Push [MENU] to enter the DSC menu.
w Rotate [CHANNEL] to select “
PPoossiittiioonn RReeqquueesstt
,”
push [CHANNEL•ENTER].
•“
PPoossiittiioonn IInnppuutt
” item appears when a GPS receiver
(NMEA0183 ver. 2.0 or 3.01) is not connected.
e Rotate [CHANNEL] to select the desired pre-programmed
individual address or “
MMaannuuaall IInnppuutt
,” push [CHAN-
NEL•ENTER].
• The ID code can be set in advance. (p. 17)
• When “
MMaannuuaall IInnppuutt
” is selected, set the 9-digit MMSI
number for the individual you wish to call by rotating [CHAN-
NEL].
--DSC Menu--
Select Item
Position Input
Individual Call
Group Call
All Ships Call
˘Position Request
Position Report
--DSC Menu--
All Ships Call
TX Complete
<CLR˘Exit>