Filter
Top Products
84
Explanation
Error
No.
Symptom Item to Check Corrective Action
Reference
Page
11 Actual measurement
time is different from
the displayed
measurement time.
The displayed measurement
time is the remaining time. The
actual measurement time may
be different from the displayed
time depending on the mode
setting of measurement time.
30
12 Measurement value on
the LCD disappears.
Has the power source
been supplied securely?
Connect to a stable power
source and insert the AC adapter
plug securely.
21
Did you interrupt the
measurement?
When starting continuous
measurement, press the
measurement button securely.
Do not press
ESC
key.
54
13
During USB
communication:
Cannot download data
output from this
instrument on the PC.
Cannot enter
commands or data from
the PC to this
instrument.
Has the USB cable
been connected
securely?
Connect this instrument and the
PC securely. 72
Has the USB cable
been disconnected?
Replace the USB cable.
—
Has remote mode been
canceled?
Send the connection command
from the PC to this instrument
and switch to remote mode. Use
the data management software
CS-S10w in the standard
accessories.
73
Has the program been
prepared correctly?
Refer to communication
specifications and check the
program. Use the data
management software CS-S10w
in the standard accessories.
—
14 Same error message
appears repeatedly.
Check the appropriate
corrective action for the
error message.
If the symptoms are not
remedied, please contact the
nearest KONICA MINOLTA
authorized service facility.
—