Filter
Top Products
21
Installation
Connecting AC Adapter
The AC adapter supplied with this instrument is used for the corresponding power
source.
Warning
(Failure to adhere to the following points may result in death or serious injury.)
Always use the AC adapter and power cord supplied as a standard accessory or
optional accessory (AC-A312), and connect it to indoor AC outlet of rated voltage
and frequency (100 - 120 V
or 200 - 240 V , 50/60Hz). Failure to follow either of
these may result in damage to unit, fire or electric shock.
If this instrument is not used for a long time, disconnect AC adapter from AC
outlet. Accumulated dirt or water on prongs of AC adapter plug may cause fire and
should be removed before use.
Do not forcibly pull any part on power cord when unplugging since this may cause
fire or electric shock. Gently disconnect by holding plug. Also, do not handle
power cord with wet hands. Doing so may cause electric shock.
Do not forcibly bend, twist or pull power cord. Also, do not place heavy object on
power cord, or damage or modify one. Any of these may cause fire or electric
shock due to damage to power cord.
Do not disassemble or modify this instrument or AC adapter. Doing so may cause
fire or electric shock.
Should this instrument or AC adapter be damaged or smoke or odd smell be
generated, do not keep using such instrument or AC adapter without correction.
Doing so may cause fire. In such situations, switch power off immediately, unplug
AC adapter and contact the nearest KONICA MINOLTA authorized service facility.
Caution
(Failure to adhere to following points may result in injury or damage to this instrument or other property.)
Use this instrument near AC outlet for easy plugging or unplugging in using AC
adapter.