Konica Minolta CS-2000A Marine Radio User Manual


 
54
Measurement
MEAS
CONT
UC00
Ob
s
2
˚
SYNC
No
n
ND
No
n
BL
off
LEN
Std
MEASURING
T01
17s
ESC : STOP
cd
m
2
Lv
13 . 17
x
0. 3966
y
0. 3905
SPD
N
r
m
MEAS CONT
UC00
Ob
s
2
˚
SYNC
No
n
ND
No
n
BL
off
LEN
Std
cd
m
2
Lv
x
y
T01
36. 20
0 . 3968
0 . 4056
SPD
N
r
m
PROPERTIES
MEASURE
INTG
66. 667
m
s
ANGLE 1. 0
˚
SPEED N
O
RMAL
SYNC N
O
SYNC
LENS STANDARD
FILTER NONE
IN
-
ND
O
FF
Display during measurementt
(Continuous measurement/when
measurement time is long)
(Continuous measurement/when
measurement time is short)
When the measuring button is pressed and held
for two or more seconds, continuous
measurement is conducted.
When the measurement time is long, the
measurement progress bar appears with the
latest measurement value. The displayed time
shows the remaining time, same as for the
single measurement.
When the measurement time is short, the
measurement progress bar does not appear, but
the measurement value is sequentially updated
and displayed.
When
ESC
key is pressed during continuous
measurement, measurement is stopped. In this
case, the measurement that is ongoing when
ESC
key is pressed will be canceled, and the
last obtained measurement value will be
displayed. If
ESC
key is pressed in the middle
of the first measurement, the measurement
value will not be displayed.
When
ENTER
key is pressed while the
measurement value is displayed, the
measurement properties are displayed so that
the measurement conditions can be confirmed.
When the measuring button or a random key is
pressed, the MEAS screen appears again.