Filter
Top Products
67
Sonar Color Mode command with FishReveal selected
(at left, dual-frequency menu; at right, single-frequency menu).
To turn FishReveal on:
1. From the Sonar Page, press
MENU
|↓ to
S
ONAR
F
EATURES
|
ENT
.
2. Press ↓ to
S
ONAR
C
OLOR
M
ODE
|
ENT
|↓ to
F
ISH
R
EVEAL
|
ENT
.
3. Press
EXIT
|↑ to
A
UTO
S
ENSITIVITY
|
ENT
|↑ to
S
ENSITIVITY
|
ENT
.
4. Press ↑ until the Sensitivity Control Bar reads 100% (or close to it),
then press
EXIT
. (If you reach the maximum limit, a tone sounds.)
Sonar chart in regular grayscale mode, left, and in FishReveal mode,
right. Notice how shallow fish formerly hidden in the surface clutter
become visible in FishReveal mode.
NOTE:
Water conditions vary greatly, and that affects sonar performance.
Under certain conditions, FishReveal will show you more fish than
normal grayscale mode, but the reverse will be true in other circum-
stances. We suggest you become familiar with both modes so you can
best match your sonar's performance to the current water conditions.
Visible
fish
Fish
not
visible
Fish
arch
Fish
arches