Filter
Top Products
10
Step 7: Install clear cap by screwing clockwise until it
meets the housing shoulder.
Note: No gap.
Step 8: Place the green indicator clip over the red lever
by aligning the arms on the clip with the slots in the
inflator (see Fig 15). Push firmly in the middle of the clip
to snap in place.
Step 9: Install an unused cylinder by rotating clockwise
into inflator until cylinder is secured firmly in inflator.
Step 10: Check to be sure service indicator is green and
green indicator clip is firmly attached.
YOUR PFD IS NOW READY FOR MANUAL USE WITH
AUTOMATIC BACKUP
DEFLATING THE INFLATABLE PFD
1. To deflate the Inflatable PFD, reverse the oral-
inflation tube dust cap and insert it into the valve or
depress valve with fingertip. The dust cap will not
lock in the deflate position so it is necessary to hold
it in place (Fig. 16).
2. Gently squeeze
the Inflatable
PFD until all air
or gas has been
expelled. To avoid
damage, do not
wring or twist the
Inflatable PFD.
3. Put the inflation
tube dust cap
back in its stowed
position on the
oral inflation tube
(Fig. 5).
4. Your device
is ready to be
repacked (see
Repacking p. 11).
FIGURE 16
Cap In
Deflate
Position