Filter
Top Products
11
REPACKING
Before repacking, completely deflate the inflation cell.
Force excess air out through the inflation tube (Fig. 16).
Do not wring cell. Put the inflation tube cap back in the
stowed position (Fig. 5).
Note: Before following the repacking sequence, be sure
to properly re-arm your Inflatable PFD.
1. Fold lapel (A) back along the dotted line (Fig. 17).
FIGURE 17 FIGURE 18 FIGURE 19
A
B C
2. Fold sides (B) and (C) outward along dotted lines.
Secure with Velcro™.
3. Make sure the inflator pull-tab is on the outside
of the folded PFD. Fig. 19 depicts a correctly
folded PFD.
Usage Below Freezing
When the temperature is below freezing, a fully
discharged cylinder may not adequately inflate your
Inflatable PFD. Under these conditions use the oral
inflator to adequately top-up the PFD.
Warning: CO
2
inflation could over-pressurize and
damage your Inflatable PFD if already orally inflated.
IS YOUR PFD IN GOOD AND
SERVICEABLE CONDITION?
Check your PFD between outings to be sure that it is
properly armed; that it is free of rips, tears or holes; that
all seams are securely sewn; and that the fabric, straps
and hardware are still strong. Inspect the inflatable