Filter
Top Products
REPACKING
WARNING: After each field use inflation, LPs must be rearmed, leak tested,
and fully deflated before repacking - see Re-arming, and Deflating.
Folding
1. Lay the LP flat on a clean surface, inflation cell up, and fold the bottom
portion-A of each side of the inflation cell up (Figure 16).
2. Fold side-B over along the full length of the dotted line (Figure 17).
3. Fold side-C over side-B (Figure 18).
4. Fold side-D over along the full length of the
dotted line (Figure 19).
5. Fold side-E over side-D (Figure 20).
6. Fold over the top side-F (Figure 21) and
cover-G (Figure 22).
Continued on the next page.
B
FiGURE 17
A A
FiGURE 16
C
FiGURE 18
D
FiGURE 19
E
FiGURE 20
F
FiGURE 21
G
FiGURE 22
Compact Tactical LP Owners Manual
8