Filter
Top Products
MD3091
The left lobe (as worn) of the MD3091 LP
contains the oral inflator tube assembly-A.
The right lobe of the LP contains the manual
inflator assembly-B and the orange whistle-C. .
To become more familiar with the LP
components:
1. Open both zippers completely, and place
the LP on a smooth, flat surface with the
inflator facing the user.
2. Ensure the oral inflator dust cap is in the
stowed position.
3. Ensure the status pin and the CO
2
cylinder
are intact, and the lever is in the up and
ready position (Figure 6).
4. If the cylinder is not intact, and/or if the
status pin is missing or broken, re-arm the
cylinder and replace the status pin – see
Re-arming (Figure 7).
5. Repack the LP – see Repacking.
Prior to Use
Visually inspect the LP prior to use to:
• ensure the LP is properly armed
• ensure the LP is free of rips, tears, or holes and all seams are securely
sewn
• ensure the fabric, straps, and hardware are free from any defects
READINESS CHECKLIST (MD3196 & MD3091)
When all applicable boxes are checked, the LP is ready for use:
F Beaded manual inflation handle is fastened.
F No rips, tears, or holes, and all seams securely sewn.
F Fabric, straps, and hardware free from defects.
F All zippers, Velcro™, and chest buckle securely fastened.
F MD3196 only: Status indicator is green.
F MD3196 only: Inflator expiry date has not passed.
F MD3091 only: Status pin and cylinder intact, and manual inflation lever
in the up and ready position.
NOTE: If there are any concerns about the readiness of the MD3196 or
MD3091, contact the Mustang Survival dealer.
A
B
C
FiGURE 5
Piercing Pin
Status Pin
Inflation Lever
FiGURE 7
CO2 Cylinder
Inator Mechanism
Up-and-Ready
Status Pin
Ination Lanyard
Beaded Manual
Ination Handle
FiGURE 6
Compact Tactical LP Owners Manual
3