Mustang Survival MD3091 Life Jacket User Manual


 
Closing Zipper 1 – Long Zipper
NOTE: Mustang Survival uses advanced SecureZip™ 2-step zippers.
1. Reset zipper 1
by pulling zipper
pull-H around
the top of the LP
to Velcro™ tab-I
(Figure 23).
2. Close zipper 1
by pulling zipper
pull-H back to the
beginning of the
zipper tape end, and fasten Velcro™ tabs-I to keep the zipper closed
(Figure 24).
CAUTION: Ensure the inflation cell does not get caught in the zipper.
Closing Zipper 2 – Short Zipper
1. Reset zipper 2
by pulling zipper
pull-J to Velcro™
tab-I (Figure 25).
2. Close zipper 2
by pulling zipper
pull-J back to the
beginning of the
zipper tape end
(Figure 26).
CAUTION: Ensure the inflation cell does not get caught in the zipper.
3. Push the zipper tape ends into the openings at the bottom of the
packed LP, and fasten the beaded manual inflation handle to the LP.
Stowing the Manual Conversion Cap (MD3196 Only)
An interior pocket is provided for stowing a
manual conversion cap (MA7219) (Figure 27).
If used, the cap should be attached by lanyard
through the eyelet located within the front
slash entry (see AUTO/MANUAL CONVERSION).
When repacking, tuck the cap into the pocket
(Figure 27) located below the inflator and inside
the front slash entry. Close the front slash entry
with the hook and loop tape over the inflator.
H
I
FiGURE 24
H
I
FiGURE 23
J
I
FiGURE 26
I
J
FiGURE 25
FiGURE 27
Compact Tactical LP Owners Manual
9