Filter
Top Products
8. Pull the buckle attachment webbing
through the vest webbing. (Figure 31B).
9. Pass the female buckle through the buckle
attachment webbing (Figure 31C) leaving
the female buckle clip flush with the vest
(Figure 31D).
10. Repeat steps 7-9 on the right-hand side of
the vest.
11. Clip the left-hand male buckle (attached to
the LP) into the female buckle attachment
(attached to the vest), (Figure 32). Repeat
on the right-hand side of the vest.
12. Fasten the buckle that connects the left-
and right-hand lobes in front of the chest
section of the vest (Figure 33). Cinch by
pulling on the loose end of the webbing.
13. Ensure all buckles are securely fastened
under the webbing, and all webbing
adjustments are tight.
14. Secure excess webbing with Velcro™ straps
Quick-Release Features
NOTE: Found on some body armor (for example, IOTV).
1. Release the LP by pressing the side release buckles below each side of
the LP and the chest buckle. This will completely release the LP from the
front of the MOLLE vest.
2. Using the appropriate release mechanism, release the vest so it can be
removed.
ATTACHING THE MA3090 HARNESS
1. Lay out the MA3090 harness assembly as shown (Figure 34):
• A. T-tab junction buckle
• B. Right-hand buckle (as worn)
• C. Left-hand buckle (as worn)
• D. Looploc
• E. Crotch strap buckle
FiGURE 33
FiGURE 31A
FiGURE 31C
FiGURE 31B
FiGURE 31D
FiGURE 32
Compact Tactical LP Owners Manual
11