Filter
Top Products
2. Insert the short side of the webbing
attachment on the back of the MD3196 LP
through Looploc D on the back strap of the
chest belt accessory. Securely fasten the snap.
3. Locate the T-tab junction buckle at the top
of the crotch strap and thread through the
lower back chest belt loop D. Secure the
T-tab with the snap, and turn the snapped
portion so it is positioned inside the chest
belt loop away from the body (Figure 34).
4. Attach male buckle C to the corresponding
female buckle on the left side of the chest
belt (Figure 35).
5. Repeat step 4 on the right side of the chest
belt (Figure 36).
6. Unfasten the crotch strap
buckle E, and put the LP
on as shown (Figure 37).
7. Buckle the chest buckle
connecting the left- and
right-hand lobes of the LP
(Figure 38).
8. Buckle the waist belt
(Figure 38).
9. Bring the crotch strap
buckle to the front
between the legs and
securely buckle it to the
chest strap (Figure 38).
AUTO/MANUAL CONVERSION
Under special circumstances, such as wading or at other times when
complete manual control of inflation of the LP is required, the MD3196 LP
can be converted from manual/automatic inflation to manual-only inflation.
The LP may be changed back to manual/automatic inflation by removing
the conversion cap.
NOTE: This procedure requires an armed MD3196 LP and an MA7219
conversion cap.
FiGURE 37
A
B
C
FiGURE 38
FiGURE 35 FiGURE 36
D
A
C
E
B
FiGURE 34
Compact Tactical LP Owners Manual
12