Filter
Top Products
8-3
Clean debris from the bowl and screen and rinse parts in fresh
water. Insert the screen, place the O-ring in the groove of the bowl
and screw the bowl on hand tight. Be sure to open the water valve
before starting the engine.
Some engines are equipped with a closed cooling system with a self-
contained reservoir for engine coolant. Self-contained systems are
equipped with a heat exchanger which uses raw water to cool the
coolant. All raw water systems are equipped with a valve and
strainer.
CORC029
MIN
MAX
ENGINE COOLANT FILL
MAX. and Min. indicators below
See Owners Manual
OFF
ON
ON
RAW WATER
STRAINER
RAW WATER
STRAINER
VALVEVALVE
Care and Maintenance
D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd 7/28/09 9:13 AM Page 8-3