Filter
Top Products
8-11
Care and Maintenance
4. Flush the engine with fresh water after each use. See Freshwater
Flushing Kit - Optional on page 8-9 for more information.
5. Correct Craft, the manufacturer of Nautique boats, applies
dielectric grease to the battery connections at the factory.
Reapply if these connections are serviced.
6. The steering tube is equipped with a grease fitting. Lubricate
the tube with a marine grade, waterproof grease every 100
hours of use or once a year, whichever comes first. Do not over-
grease the steering tube. Over-greasing can cause damage to
the wiper seal and allow the excess grease to leak and expose
the steering rod to moisture and corrosion.
7. Wax the hull at least once a year with a UV wax. Rotate the boat
during outside storage every 6 months for even color blending.
8. Apply a rust corrosion protection spray such as Boeshield T-9
®
to the engine and bilge components (electrical connections,
pumps, etc.) once a month or more frequently depending on
exposure. Turn the engine off and ensure that the engine and
all components are cool and dry before application. Follow all
manufacturer’s insturctions when applying the product.
Battery Maintenance
Explosion or fire hazard from vented
fumes can cause death or serious injury.
• Wear eye protection and rubber gloves when working
on or around batteries.
• DO NOT charge or use a battery booster to start your
engine.
• Charge the battery outside of the boat.
• DO NOT smoke or bring a flame near a battery at any
time.
• DO NOT have your head directly above a battery when
making or breaking electrical connections.
• DO NOT use a metal object to spark between battery
posts to check if the battery is charged.
!
D-Drive Sec 8_2010:Nautique Ski Sec 8.qxd 7/28/09 11:09 AM Page 8-11