Filter
Top Products
108
CARE AND CLEANING
Protect your GEO 2 from shock, excessive temperatures, ex-
posure to chemicals, and tampering. Protect the lens against
scratches with a Instrument Lens Protector. Small scratches will
naturally disappear underwater.
• Soak and rinse the GEO 2 in fresh water at the end of each
day of diving, and check to ensure that the areas around
the Low Pressure (Depth) Sensor (Fig. 131a), PC Interface
Data Port (Fig. 131b), and buttons are free of debris or
obstructions.
• To dissolve salt crystals, use lukewarm water or a slightly
acidic bath (50% white vinegar/50% fresh water). After
removal from the bath, place the GEO 2 under gently
running fresh water and towel dry before storing.
• Transport your GEO 2 cool, dry, and protected.
INSPECTIONS AND SERVICE
Your GEO 2 should be inspected annually by an Authorized
Oceanic Dealer who will perform a factory prescribed function
check and inspection for damage or wear. To keep the 2 year
limited warranty in effect, this inspection must be completed one
year after purchase (+/- 30 days).
Fig.131-CASEBACK
b
a