Filter
Top Products
3.2.1 Introduction to Main Menu
After entering the password, you may access all of the system’s
functions and parameters. The Main Menu looks like this:
HELPFUL HINTS
1. To make a selection, key the highlighted letter that corre-
sponds to a menu selection.
2. To execute the selection, type [Enter/CR]
3. Select g Save Changes from Main Menu after making modi-
fications to any Model 2094 parameter. Otherwise, changes
will be lost when the Model 2094 is turned off.
13
The Main Menu options are briefly described below.
System Configuration options allow you to change various
aspects of the Model 2094’s operation, e.g., framing, line cod-
ing, and aggregate bandwidth.
System Diagnostics/Statistics options allow you to monitor
the network performance, initiate V.54 loops, local loops, and
send test patterns. Network performance parameters are
updated once a second, giving you the ability to quickly deter-
mine if there is a problem.
Unit Options allow you to customize the Model 2094 for your
location. You can change the default header names to give
each unit a unique name and password. Also, you can reset
the unit to its default settings without the manual. It also has a
Service Information screen in case you need technical assis-
tance from Patton.
Save Changes Once you have configured the unit to your
satisfaction, you can save the changes permanently by exe-
cuting the Save Changes command. This will update the units
configuration and save all the parameters to permanent mem-
ory.
Logoff For security, log off the control menu by executing the
Logoff command. This will blank the screen until an [Enter]
key is pressed.
14
d
a
b
c
d
e