16 C5619M (8/12)
SNMP CONFIGURATION
The SM5200 supports SNMP v2c and v3 communications. You can gather status information about your system manager by issuing GET requests
or configuring the unit to send traps to a trap manager.
CONFIGURING SNMP V2C
1. Navigate to the System page.
2. Select Enable SNMP
3. Select SNMP v2c.
4. Type the community string used to issue GET requests to the system manager in the Community String field.
5. Type the IP Address or hostname of the trap manager in the Address field under Trap Manager.
NOTE: The system manager must be able to connect to the trap manager over the primary network interface.
6. Type the community string used by the trap manager in the Community String field, under Trap Manager.
7. Click Save.
CONFIGURING SNMP V3
1. Navigate to the System page.
2. Select Enable SNMP.
3. Select SNMP v3.
4. Type the SNMP v3 user name in the SNMP user box.
5. Select the encryption algorithm for authentication from the Authentication drop-down menu. If you choose an authentication method other
than None, type your password in the text box below the selected Authentication algorithm.
6. Select the privacy encryption algorithm from the Privacy drop-down menu. If you choose a privacy method other than None, type a
password in the text box below the selected Privacy encryption method.
7. Type the IP address or hostname of the trap manager in the Trap Manager Address box.
NOTE: The system manager must be able to connect to the trap manager over the primary network interface.
8. Click Save.