Filter
Top Products
4 C5619M (8/12)
About the Web Configuration Application
The SM5200 is a network appliance that serves as the system management component of the Endura
®
IP video management system. The
SM5200 Web Configuration Application allows users to quickly and easily configure the SM5200 without installing additional software.
This guide is designed to assist Pelco-certified system administrators with the configuration of the SM5200.
ENDURA APPLICATION COMPATIBILITY
It is recommended that you note the minimum software version requirements for Endura applications comparable with the SM5200. Using
software versions earlier than those listed below may result in unexpected system manager behavior.
• WS5200/WS5070: Version 2.5.3.10286 or later is required to configure operator access to the Pelco Web Viewer.
• Endura Mapping: Version 2.4.0.4959.
• Endura Utilities: Version 2.3.10.3.
NAVIGATING THE WEB INTERFACE
Settings in the SM5200 configuration interface are organized across five pages. Click any of the tabs to navigate pages in the interface.
Additional information and settings are found in the page header, System Information, and System Tools areas of the Web interface.
NOTE: You can click Pelco Web Viewer to exit the configuration application and search, view, or download video clips.
Figure 1. SM5200 Web Interface
ì
Page: The SM5200 configuration interface consists of five pages. Click any of the tabs to access a different page.
î
System Name and Links: This area displays the system name, your User Name, and links to log off or access SM5200 documentation.
ï
Pelco Web Viewer: Click to exit the configuration interface and view live and recorded video.
ñ
System Information: Displays information about the system manager.
ó
System Tools: Click to reveal maintenance options for the SM5200.