Filter
Top Products
8 C656M-E (4/07)
9. Reinstall the left cover of the pan and tilt:
a. Properly position the cover and slide it into place. The sides of the cover must fit under the
front and back rain guards of the pan and tilt. The top of the cover must seat against the lip of
the top gasket. (Refer to Figure 4.)
Figure 4. Installing the Esprit Cover
b. Apply pressure and push the top of the cover down to align the screw holes (refer to Figure 5).
c. Insert the Phillips screw and washer. Tighten until the screw will not turn.
WARNING: Make sure you seal the unit. Otherwise, moisture could disable or damage
the Esprit.
NOT SEALED
GAP
CORRECT
INCORRECT